Linelock Solenoid - BTE 46000
  Back to Installation Guides

Linelock Solenoid - BTE 46000

LINELOCK SOLENOID

Linelock/Roll Control

  • Linelock uses 1/8 NPT. Different size adapters will be required for all other applications. Adapters not included.
  • Electrical connections - either wire can be used, there is no polarity. One wire goes to ground, other wire goes to switch. Use 5 amp fuse from switch to 12-volt source.
  • We highly recommend that all installations be performed by a professional.
  • Not recommended for use with ABS brake systems.
Posted by Brandon Barrentine at 6:56 PM